Haven't had much time to work on the car. Few parts came in the mail though
First off the ECU.
YES! An ECU 😂. I'll be converting the stock carb A12 to EFI.Since this engine going to be boosted its much easier and safe to change fueling and ignition through a laptop than fiddling with jet sizes and distributor springs and what not.
This is a low cost DIY Arduino based ECU called "Speeduino". Took me few days to assemble the ecu as it comes in individual parts. This little guy can run engines upto 8 cylinders. Has an 250kpa internal map sensor too. Since its arduino based I'll be adding a bluetooth module to communicate with the ecu wirelessly.
Managed to 3d print and enclosure for the ecu out of abs plastic. Im still sceptical about the ecu connector. But this this will have to work for now.
One more thing came in the mail 😅
Its a 1100cc e85 compatible (not that i need ) injector. I'll be running and SPI (single point injection) set up for now. This will flow more than enough fuel for the engine.
Edited by a_killa_nath