hrm

Thanks guys for the advices. Do you know a good auto AC repair shop around Battaramulla? As i was about to do a general full lubrication service shortly it will be help full to do both types of services at once.

Sure.. will do it straight away

Yeah Thanks mate .. It might be a gas leak or something. But my concern is why the compressor keeps working without stop. Is the Ac clutch doesn't disengaging properly?

Hi, I have a 1994 Lancer and since recently I experienced that AC is not cool enough. I can hear the compressor working but it is not turning on and off as usual. When I press the AC switch wind starts to blow but little difference with normal blower air. And the compressor keeps working without periodical shutting down. Don't have much insight on to this as I'm a newbie to cars. What would be the reason to this ? and how to fix this up?. PS: I use the car sparingly Thanks in advance.

The new LiteAce doesn't seems intuitive to buy. I mean only the look it has.

well said dude..

:lol:

here u go !

nope machan. I think that's all I have.

If this is the case wouldn't you be able to make it for a CS2 or CS3 ?

I don't think GDI is a bad technology but the thing is does our people know how to use GDI effectively?

;)

Thanks for your valuable comments bro. really appreciate them ! could you also recommend what types of engine oil/ brake oil are best suited for this model? currently I use Lanka S*p*r Pl*s and didn't know much about break oil types available

Hi friends, I had recently bought above car (Lancer CB2A) and this is my first car. It was a 1994 brandnew manual transmission with 4G15 engine (Carb). It has about 164K logged. Had done few running repairs like clutch adjustment , fixing radiator fan issue recently and didn't had any more troubles for now. Previous owner said the timing belt was replaced recently and also had new battery and tires. Just want to know whether there are any known issues exist for this particular model and also would like to hear some expert advices from you guys on maintaining her. I'm not a daily runner and use the car only in Weekends. Thanks in advance !

thanks mate ! I will check whether I can do a remote start as well.

Hi friends, I have a 1994 Lancer (CB2A) car which bought about 6 months ago. When I got it the previous owner gave me a 4 button remote and said only the button labeled 2 is working for remote central locking. It's a kind of old remote with wooden/teak finish. I'm not sure whether this is an orginal one or a third party one. However it doesn't have a security alarm or flashing lights and worked without much of an issue. But today morning I discovered a new feature accidently . If I press keys 1+3+1 then car ignition lights will turn on (without putting the key). I can start the car using the key afterwards normally. But I could not turn off the engine with key and I also can remove the key while engine running. If I press 1+3+1 remote combination again, then the engine stops. Just want to know whether this scenario is normal ? If there are any more features with the remote, is there any way I could figure them out ? (since previous owner knew only about the remote central lock) Please share your thoughts if you have a similar arrangement. Thanks in advance.

just saw it today. My father had a very old Delica petrol (34 sri) a long back. then a Lancer 1400 (1978 I think) after couple of Nissans now again a Lancer CB2A (1994)

Thanks mate! how economical would be the economy mode? is it really save fuel compared to normal AC mode?

Hi All, I'm a newbie to this forum and I have a small issue to be clarified from you guys. I have a 1994 Lancer CB2A and it has a two way AC knob (I guess some other cars also have). When i press it once the AC turns on and the backlight turns amber. when I press it deep again the backlight changes to Green. Is it the former one (Amber position) related to AC economy mode or something? can u guys explain the difference between these two modes (Amber and Green)? Thanks in advance.