Grilles

[jdnet]

  On 9/5/2011 at 4:57 PM, CyRaX said:

Not from pettah actually

http://factory.dhgate.com/engine-hoods/carbon-fiber-grill-mesh-for-suzuki-swift-p43113888.html

The car is a red one...what do you think?

pic is too small but the mesh seems like the one I have on my truck. The frame is seems like it's carbon fiber. You are installing this on the swift right? If you can get one down and it's a straight swap it would be the best way to go about this as you won't have to modify anything. Another thing I would highly suggest is taking your existing grille to someone who does fiberglass repairs and see what he can do for you. He should be able to modify your existing grille and stick a mesh in there while keeping it looking like stock. Eitherway it's your choice (well your moms) and if you feel you are up for the challenge, do try it.Just make sure you leave the grille in a condition that can be repaired.

[Pericles]

  On 9/5/2011 at 7:10 AM, jdnet said:

I stopped using gloves ever since that visit to the doctor. Bad memories

TMI dude.

[kelum_wj]

  On 9/5/2011 at 3:27 AM, jdnet said:

Here you go cyrax. The mesh is a bit out of place since it came off after the truck got hit last week. Gotta get it back togther this weekend.

Make sure you do the job right and make mummy proud.

This looks good

[jdnet]

  On 9/6/2011 at 4:32 AM, kelum_wj said:

This looks good

I'm planning on changing it though. Thinking of fabricating a billet grille.

[jdnet]

  On 9/6/2011 at 4:23 AM, Pericles said:

TMI dude.

The world has to know peri!

[CyRaX]

  On 9/6/2011 at 3:31 AM, jdnet said:

pic is too small but the mesh seems like the one I have on my truck. The frame is seems like it's carbon fiber. You are installing this on the swift right? If you can get one down and it's a straight swap it would be the best way to go about this as you won't have to modify anything. Another thing I would highly suggest is taking your existing grille to someone who does fiberglass repairs and see what he can do for you. He should be able to modify your existing grille and stick a mesh in there while keeping it looking like stock. Eitherway it's your choice (well your moms) and if you feel you are up for the challenge, do try it.Just make sure you leave the grille in a condition that can be repaired.

After I cut off the existing plastic mesh off its frame,there's no looking back right.Yeah it's same as your one,a diamond mesh.I already payed for the grill.It should be here within a couple of days.I could have done it by myself with a risk involved but the carbon kinda looked worthy,and I've never seen any like that here.

[kelum_wj]

  On 9/6/2011 at 8:13 AM, jdnet said:

I'm planning on changing it though. Thinking of fabricating a billet grille.

This looks sporty and the billet grille would look stately

[kelum_wj]

  On 9/6/2011 at 10:22 AM, CyRaX said:

After I cut off the existing plastic mesh off its frame,there's no looking back right.Yeah it's same as your one,a diamond mesh.I already payed for the grill.It should be here within a couple of days.I could have done it by myself with a risk involved but the carbon kinda looked worthy,and I've never seen any like that here.

How much did it cost? Btw I thought that it was for the Kelisa

[CyRaX]

  On 9/6/2011 at 12:46 PM, kelum_wj said:

How much did it cost? Btw I thought that it was for the Kelisa

No mate,the kelisa was gone long ago.I'll have to check the price with my father,he's the one who paid for it.

[Watchman]

  On 9/6/2011 at 3:20 PM, CyRaX said:

No mate,the kelisa was gone long ago.I'll have to check the price with my father,he's the one who paid for it.

mommy's car; daddy bought it; so where does YOUR value addition come in all this?