We found you speeding on AutoLanka Forums without any registration! If you want the best experience, please sign in. Safe driving!
- 0
AutoLanka Cars For Sale
Post Your Ad Free [Click Here]
-
Recent Status Updates
-
-
Restoring a 90's Diesel.· 13 replies
Gentlemen, What are your thoughts on doing a soft-resto on an unhacked Nissan SB14 that has been sitting around for 8 years?
1997 car registered in 2000. Manual gears, 2L CD20 diesel. Single owner -Decased. Family who are known to me - dont use it. Unhacked body and almost pristine interior. Clean body lines, no accidents. Complete car and appears untouched by makabasses. Engine shows signs of under-compression, brakes and clutch-plate need replacing, tyres are on the brink of decomposing. Power mirrors do not work. Needs a paint job. No major corrosion but early-stage rust spots on the boot lid.
-
-
Nissan might close down operations in 12 -14 months? https://www.carscoops.com/2024/11/nissan-exec-says-we-have-12-or-14-months-to-survive/ Are we going to see more companies shutting down or is this a one off. So much for the new GTR and the new Patrol.· 10 replies
-
Is there an alternative to the Maruti 800? A friend of mine is looking for an extremely cheap to run and fix car for around 1.5M. While I do advocate old Japanese cars in that budget - if his need is basic A-B motoring at the lowest possible cost - maintenance wise and with fuel - is there any other option that I am forgetting?· 7 replies
-
-
Albums
-
Giko's Clicks
- By Giko,
- 0
- 0
- 75
-
Street2Track Mirigama 2022 (Sep 17th)
- By Giko,
- 0
- 0
- 25
-
Pannala Road Race 2016 (Dec 4th)
- By Giko,
- 0
- 0
- 4
-
Katukurunda Speed 2022 (Dec 4th)
- By Giko,
- 0
- 0
- 10
-
Concourse of Elegance 2020 - Hampton Court, United Kingdom
- By Crosswind,
- 3
- 0
- 90
-
-
Blog Entries
-
-
Recent Topics
-
Question
MadMMX
Hi Guys,
Whats a good place here that will do a good ultrasonic injector clean ? I'm gonna be taking out my fuel injectors (petrol) soon to replace me PCV valve (routine replacement) and since I will need to remove the injectors as well, I guess I may as well get them cleaned. Already have all the replacement o-rings in hand. There is a place that advertises ultrasonic cleaning called asnu lanka or something but haven't heard much else about them. Anyone have experience with them or anyone else who does ultrasonic cleaning ?
Cheers,
MadMMx
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.