Guys, I have this issue on my Mazda 3 2007 auto and want to know if anyone has experience such a thing and a place where I can get this fixed (except Mazna and CarMart)
1. Car is running normal 95% of the time
2. Sometimes while driving I feel that car is pulling too much and accelerating itself. When I release the accelerator RPM does not come down as at normal condition. When this happens breaking power is also low due to engine pulling the car. RPM retains at about 1000 RPM
3. When I pull the car to side and take the gear to "N" RPM goes up to 1500 - 2000. Then after few seconds it comes down to 1000 again and races itself few times between 2000-1500-1000 and then comes to normal idle. then I can continue normally.
4. If I do a ECU reset I can go about 500km without this. But again issue occurs.
5. I cleaned the Throttle body and that's not the issue, When scanned everything seems ok, probably because issue is not there when I scan.
Has anyone experience such an issue. I searched on net and most of the threads talk about Purge Solenoid. But not sure.
I have an empty parking slot at home previously occupied for 6 years by the starlet and 3 months by an AD wagon -what would be a bang-for-the-buck fun shitbox? Preferably auto as I live in a crowded suburb that has sapped the joy of stick shift out of my system.
Question
Sha7
Guys, I have this issue on my Mazda 3 2007 auto and want to know if anyone has experience such a thing and a place where I can get this fixed (except Mazna and CarMart)
1. Car is running normal 95% of the time
2. Sometimes while driving I feel that car is pulling too much and accelerating itself. When I release the accelerator RPM does not come down as at normal condition. When this happens breaking power is also low due to engine pulling the car. RPM retains at about 1000 RPM
3. When I pull the car to side and take the gear to "N" RPM goes up to 1500 - 2000. Then after few seconds it comes down to 1000 again and races itself few times between 2000-1500-1000 and then comes to normal idle. then I can continue normally.
4. If I do a ECU reset I can go about 500km without this. But again issue occurs.
5. I cleaned the Throttle body and that's not the issue, When scanned everything seems ok, probably because issue is not there when I scan.
Has anyone experience such an issue. I searched on net and most of the threads talk about Purge Solenoid. But not sure.
Thanks,
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.