upalranku Posted April 17, 2019 Share Posted April 17, 2019 my allion 2013 cars rpm goes very low and car start vibrating when it is in idle, (N). but when it starts first time in morning it works fine. what may be the problem Quote Link to comment Share on other sites More sharing options...
raveeJaya Posted April 17, 2019 Share Posted April 17, 2019 On 4/17/2019 at 8:23 AM, upalranku said: my allion 2013 cars rpm goes very low and car start vibrating when it is in idle, (N). but when it starts first time in morning it works fine. what may be the problem Expand What is the RPM you see when it start Vibrating. Did you do a Tuneup recently ? Quote Link to comment Share on other sites More sharing options...
upalranku Posted April 17, 2019 Author Share Posted April 17, 2019 change battery recently and rpm shows below 400 Quote Link to comment Share on other sites More sharing options...
hrm Posted April 17, 2019 Share Posted April 17, 2019 On 4/17/2019 at 11:26 AM, upalranku said: change battery recently and rpm shows below 400 Expand Then drive for 100km or so and see. Maybe ecu got reset due to battery replacement and need some relearning to get things normal. 1 Quote Link to comment Share on other sites More sharing options...
raveeJaya Posted April 17, 2019 Share Posted April 17, 2019 Yes it may be due to battery replacement as well. Why dont you remove the battery terminal for about 10mins and re-plug it. 'Normally if you remove the battery and put it back the RPM goes high according to my past experience. In normally these vehicles should have 600 - 750 RPM at idle, depending up on whether AC clutch is engaged or not. Anyway if you have not done the Tuneup recently, better try a Tune up too. Do you see the Check Engine light on while the Engine is running ? Quote Link to comment Share on other sites More sharing options...
Davy Posted April 17, 2019 Share Posted April 17, 2019 On 4/17/2019 at 11:32 AM, hrm said: Then drive for 100km or so and see. Maybe ecu got reset due to battery replacement and need some relearning to get things normal. Expand Agree. If this started happening immediately after battery replacement, it's probably because the ECU was reset. Driving a few kms in mixed conditions (with AC on) should allow time for the ECU to re learn. Quote Link to comment Share on other sites More sharing options...
upalranku Posted April 18, 2019 Author Share Posted April 18, 2019 On 4/17/2019 at 11:38 AM, raveeJaya said: Yes it may be due to battery replacement as well. Why dont you remove the battery terminal for about 10mins and re-plug it. 'Normally if you remove the battery and put it back the RPM goes high according to my past experience. In normally these vehicles should have 600 - 750 RPM at idle, depending up on whether AC clutch is engaged or not. Anyway if you have not done the Tuneup recently, better try a Tune up too. Do you see the Check Engine light on while the Engine is running ? Expand engine light off Quote Link to comment Share on other sites More sharing options...
Rumesh88 Posted April 18, 2019 Share Posted April 18, 2019 On 4/17/2019 at 11:26 AM, upalranku said: change battery recently and rpm shows below 400 Expand Was the battery swap done without a backup? Quote Link to comment Share on other sites More sharing options...
upalranku Posted April 18, 2019 Author Share Posted April 18, 2019 yes Quote Link to comment Share on other sites More sharing options...
upalranku Posted April 18, 2019 Author Share Posted April 18, 2019 On 4/18/2019 at 8:27 AM, Rumesh88 said: Was the battery swap done without a backup? Expand yes battery swap done without back up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.