Jump to content
  • entries
    55
  • comments
    41
  • views
    55,114

About this blog

The pursuit of pure JDM Perfection. the story of how i took an automatic SiR-G sedan and transformed it into one of honda's rarest gems. the Integra Type R sedan. 

car was acquired in December 2011, and the build has been going on since. 

17492662_10154502385663333_4945598762691660812_o.jpg

Read more  

Entries in this blog

Komisiripala

the stock headlights smudged more than a van Gogh painting. so i asked our resident DIY-guru Davy for some help in restoring them. he didn't just help, rather took over the whole undertaking. and the end result... well...

4.thumb.JPG.c26c963d265985671a5ea7fff4bbbab7.JPG

1.thumb.JPG.4e265881a3fed344eed24e7835f607dc.JPG

 

Rice lights pair $150

Spec lights (same as above) $293

Shipping $300 courier, or $100 plus nawila waren at customs.

Hope that explains it

davy my man tell me where i can make a statue in your honour!

blown away. mind you this is after bara had a go at the lights...

 

Bought the alloys. Handed them over to Indika to spray gloss white. Got the white Center caps printed as well.

Progress is slow! Aargh!!

 

a little bit of history.

taken outside the mawanella police. when we went to rescue a certain zx in trouble...

5a4d0c23ce93b_photo(57).thumb.JPG.dc63b85f24f3ede935dd50976702bc82.JPG

since progress is slow, here's a shot of my new alloy caps.

photo1bs.jpg5a4d0c7ecadeb_photo(58).JPG.68e5ccec7265af098327629f565cb5c8.JPG

 

 

 

Read more  
Komisiripala

an interesting eBay story:

was looking for the black seatbelts all over the place. since i changed the interior color. attempted spraying the existing ones. since that would win me that darwin award again, gave up the idea. then did some seatbelt research and found out that belts are not interchangeable with anything else as this car has dual airbags. the EG doesn't. so anyways, found what i was looking for on ebay:

5a4d0cdc06fcb_(KGrHqN!gsE3ErMnCRUBN-4GDv!6g_3.JPG.cdfa052548a1cb198b0db8eb78d66eb1.JPG

sadly, only coupe. no 4 door sedan listings. out of curiosity, contacted the seller.

the seller, Steve from sportsnimports, went through the trouble of:

1. checking whether the 2 door and 4 door match

2. scouring through 25 integras in his yard to find black belts in good condition

3. pressure washed them and rubbed out the rust, olied them up etc etc

4. made a listing for me and put it up

... all for $50.

the closest quotation i got from our local boys for the seatbelt set of an EG ( i would have had to say good bye to pretensioning and then get killed by the airbag, mind you) was 18,500.

i wish our parts guys shared an iota of this guys' work ethic. very very impressed!

in other news, found the entire JDM decal set from the type R DC2 teg. OEM honda stickers. you know, the jap stuff that say 91octane unleaded in the fuel lid, and the color code and tyre pressure on the door, and the SRS thingey on the sun visor. waiting for a stressed out moment to place the order

 

 

Read more  
Komisiripala

see!! i told you guys there's a 4 door type R! its a very rare JDM only DC2 model. never made it out of japan. but it DOES EXIST!! props to chooty putha for finding this vid! wow... i was in ecstasy... and i want my car back!

 

 

so here's the strut tower bars in place. have to do a little messing around to get the aluminium bar in place. but we'll firgure something out. the double bars were a perfect fit for the stock strut tower. but i had to be the smartass and change that no... :S

5a4d3b8d009bc_photo2(39).JPG.e6c90cea5c58d3a54efbf3c926cde43e.JPG

aand finally, after long last they are prepping her for the last coat. so happy. only a few more weeks!

 

a little more each day. the gear lever was finally sorted, and the floorboards closed. the shortshifter was also installed, with a little lesson on physics.

5a4d3c383ed7e_photo3(25).JPG.2b07a10646c5de17d001080254164b98.JPG

paint prep work is also progressing alongside.

 

Read more  
Komisiripala

Looks like doomsday is Christmas for me. Arriving on Friday are:

1. The alloys

2. The cams

3. The valve springs and retainers

4. The MSD blaster kit

5. The ACL bearing kit

6. The Blox red Allan key lug nuts.

Will post photos once I've stopped having an orgasm over it

darwin racing 15" alloys. being cleared from port today. getting these either powder coated in white, or lquid gloss white finish. and white hub caps with the red H logo. jeevithe mal aiyya inna kal (for all the little decals and whatnots i print at anim8)

5a4cf587410f0_photo(56).JPG.54561883031311d3002846334f14f138.JPG

Removed the dashboard for paint today. I also got new AC vents since the existing ones were broken. There was a metric ton of rust behind the dash. Bloody hell. So that's official now I am never seeing this car again!

Will post before and after pics soon. Haiyyo.

 

 

Read more  
Komisiripala

i really dunno where to start. to hear that engine kick up today... probably the happiest thing i'll hear next to the cries of my unborn son/daughter. and it idles PERFECT. there's no "gentle lope" or "rough idle" that so many people spoke about with the BC cams, saying that i won't be able to move the car a foot without an aftermarket ecu. you can see for yourself:

 

also, here's the finished engine bay, with the dizzie mounted, plug wires installed and wire cover in place.

5a4d394b586ac_photo1(28).JPG.e1eab56097077773e1600eb08b7127e9.JPG

also, pug306, you asked what the gauge was. its a fuel pressure gauge, here's a closeup. it does a little jig on ignition, which is hella cool, i'll try and record that soon.

5a4d39452738c_photo2(29).JPG.00677405856324f6b63af49d6a685d85.JPG

now, onwards to finish the paint. and then the interior!

 

thanks guys! it is such a pleasure to see it all come into place. and cyclist, yes i did wonder that myself! but here are a list of things that need to go in there:

1. wiper washer fluid reservoir

2. type R aluminium strut tower bar

3. ultra racing 3 point tower strut

4. the battery

5. the grouding wire kit with the engine bay mounted voltmeter

6. the 4 ballasts for the two pairs of HID's.

so all that should hopefully fill the gaps. i remember the first painter saying that the engine was a "saagarayak". somehow saagare hindila wagey tikak, no?

but trust me man, at this moment in time i am simply overjoyed and beside myself. look how well she idles. and the noise... oh the noise! you guys should hear it in person. the hint of bass the whine of the intake. its pure automotive auditory orgasm! with the APEXi exhaust note it should be even sweeter...

 

  •  
Read more  

AutoLanka Cars For Sale

Post Your Ad Free [Click Here]



×
×
  • Create New...