Cardboards For The Boot

[Iced-T]

Hi,

Can anyone advise me on where I can get a thick cardboard for the boot?

Around how much will they cost?

Is there any place that could make one for me?

Thanks.

[Vengeance]

Didn't you try using a cardboard box in there? You can get them from small retail shops ("sillara badu kada") for a few bucks.

[Iced-T]

  On 5/9/2016 at 3:34 PM, maxxarox said:

Didn't you try using a cardboard box in there? You can get them from small retail shops ("sillara badu kada") for a few bucks.

But those are too thin... thats what I am using now by the way.. I really hate it

I have somehow lost the original boards.... those were very good, and can be folded into two to access the spare wheel and tools.

The proper boards not only are neater but distribute the load across the boot so different sections dont go in.

[Vengeance]

How about hardboard? You can get them in different sizes from local hardware shops. These can be resized / cut in to shapes easily using a grinder or a small saw blade (those small blue ones), plus they'll look a lot neater than cardboard. There are even thicker boards available, you can get these from pettah (turn left from 1st cross street) if you can't find them in hardwares.

[Iced-T]

  On 5/9/2016 at 4:08 PM, maxxarox said:

How about hardboard? You can get them in different sizes from local hardware shops. These can be resized / cut in to shapes easily using a grinder or a small saw blade (those small blue ones), plus they'll look a lot neater than cardboard. There are even thicker boards available, you can get these from pettah (turn left from 1st cross street) if you can't find them in hardwares.

Yes... this makes better sense ... something neat and rigid.. I will look into these hardboards.. I hope they are not expensive