When realy padel to the board (like u want to drag!!!) there is a major loss on power, it starts around 4000 RPM and go up to about 5500 rev and again form 7000 all the way up to 8000. can't find whats wrong ????????
But if gradually reve there is no problem at all, its smooth as ever
i am trying to change the plugs to see any progress but couldn't find any place to buy them... any one know a place to buy them (NGK PLFR6A-9 or NGK BKR6EIX-11)
So for a spirited convo like this old times; ?BYD
My father has gone ninja about getting one, despite being the new hype/fad here these are common across the world and I've seen a few cross 100,000km in Nepal and Australia.
Seal - Looks nice, very premium interior but too low for my applications
Sealion - Very Premium, feels very well built, BUT that 1.5L on that reasonable chunk of car with a measly 18KW battery seems like a recipe for trouble, incase they sink in value at least the fuel economy must justify that (They say it's a BYD engine - though the lore is it is a hyundai engine)
Atto 3 - Most sold from their lot apparently, common af, Seems to be the best bang for buck IMHO, Its electric since BYD is famed for that, Interior is kinda good, the thing is larger than a vezel but not too large like the Sealion, cheap mobility I guess with less things to go wrong
Dolphin, almost a smaller atto and again too car like and not suited for my application.
JK nailed it on the price and distribution but the only guaranteed thing here is the lot are gonna muck up the aftersales. The Kandy center staff behave like the crew from a Govt. post office.
What are your thoughts and opinions? Could this be the next Wagon R or is this a passing fad like the Micros of 2000s-2010s?
I have an empty parking slot at home previously occupied for 6 years by the starlet and 3 months by an AD wagon -what would be a bang-for-the-buck fun shitbox? Preferably auto as I live in a crowded suburb that has sapped the joy of stick shift out of my system.
Question
KC2626
Car - NISSAN PRIMERA SR20VE
Mods - K&N flat filter
Hi guys
When realy padel to the board (like u want to drag!!!) there is a major loss on power, it starts around 4000 RPM and go up to about 5500 rev and again form 7000 all the way up to 8000. can't find whats wrong ????????
But if gradually reve there is no problem at all, its smooth as ever
i am trying to change the plugs to see any progress but couldn't find any place to buy them... any one know a place to buy them (NGK PLFR6A-9 or NGK BKR6EIX-11)
Thanks
Link to comment
Share on other sites
30 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.