Sirimanna Posted March 14 Share Posted March 14 Hello everyone, please refer to the sound below. In my 2011 Lancer, when I drive at a constant speed, an abnormal sound comes from the engine area. I recently changed all the pulleys because of this. Any advice on this? https://youtube.com/shorts/G3uxYjSm6b4?feature=share https://www.youtube.com/shorts/G3uxYjSm6b4 Quote Link to comment Share on other sites More sharing options...
0 nkt Posted March 14 Share Posted March 14 Did changing the pulleys fix it? I also have this in my G11 and goes away when increase the rpm a little bit. Usually comes around 1500-1800 rpm Quote Link to comment Share on other sites More sharing options...
0 Sirimanna Posted March 14 Author Share Posted March 14 Nop, same like yours, its still not fixed even changed pulleys , same as your 1500-1800 RPM.. Quote Link to comment Share on other sites More sharing options...
0 Sirimanna Posted March 14 Author Share Posted March 14 On 3/14/2025 at 2:31 AM, nkt said: Did changing the pulleys fix it? I also have this in my G11 and goes away when increase the rpm a little bit. Usually comes around 1500-1800 rpm Expand Nop, same like yours, its still not fixed even changed pulleys , same as your 1500-1800 RPM Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 (edited) Is it a rattle? Does it sound a bit like pebbles in a tin can? Can't hear when the vehicle is idling and accelerating in neutral/park, only appears when car is on the move? Edited March 14 by Hyaenidae Quote Link to comment Share on other sites More sharing options...
0 Sirimanna Posted March 14 Author Share Posted March 14 (edited) On 3/14/2025 at 4:27 AM, Hyaenidae said: Is it a rattle? Does it sound a bit like pebbles in a tin can? Can't hear when the vehicle is idling and accelerating in neutral/park, only appears when car is on the move? Expand Same issue discussed here, but no any proper solution, Edited March 14 by Sirimanna Quote Link to comment Share on other sites More sharing options...
0 nkt Posted March 14 Share Posted March 14 On 3/14/2025 at 4:27 AM, Hyaenidae said: Is it a rattle? Does it sound a bit like pebbles in a tin can? Can't hear when the vehicle is idling and accelerating in neutral/park, only appears when car is on the move? Expand On 3/14/2025 at 3:13 AM, Sirimanna said: Nop, same like yours, its still not fixed even changed pulleys , same as your 1500-1800 RPM Expand In my case sounds more like a loose spinning chain noise. I thought it might be the timing chain but it doesn't happen in idle or when revving in neutral 1 Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 On 3/14/2025 at 4:31 AM, Sirimanna said: Same issue discuses here, but no any proper solution, Expand Is it as bad as the reddit video? The faint "pebbles in a tin can" noise @ 1200 - 2500 RPM is an inherent characteristic of 4A9 engines but it shouldn't be as bad as the video above. We don't have an automatic tensioner in our 4A9s, it's got a mechanical one so even though the sound is somewhat similar that can't be the reason in your case Quote Link to comment Share on other sites More sharing options...
0 Sirimanna Posted March 14 Author Share Posted March 14 On 3/14/2025 at 4:39 AM, Hyaenidae said: Is it as bad as the reddit video? The faint "pebbles in a tin can" noise @ 1200 - 2500 RPM is an inherent characteristic of 4A9 engines but it shouldn't be as bad as the video above. We don't have an automatic tensioner in our 4A9s, it's got a mechanical one so even though the sound is somewhat similar that can't be the reason in your case Expand Yes, it's as bad as that video. I think this is a common issue. As long as it doesn’t affect my engine, I’ll just go with it. I even went to a local Mitsubishi dealer, but they couldn’t find the issue either. 😞 Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 On 3/14/2025 at 4:37 AM, nkt said: In my case sounds more like a loose spinning chain noise. I thought it might be the timing chain but it doesn't happen in idle or when revving in neutral Expand If it's a loose timing chain the rattle should be heard at engine startup and then disappear afaik https://youtube.com/shorts/qAilLQmLveY Quote Link to comment Share on other sites More sharing options...
0 Sirimanna Posted March 14 Author Share Posted March 14 On 3/14/2025 at 4:44 AM, Hyaenidae said: If it's a loose timing chain the rattle should be heard at engine startup and then disappear afaik https://youtube.com/shorts/qAilLQmLveY Expand Nop, this happened when moving RPM around 1500-2000 around 50-60 speed Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 On 3/14/2025 at 4:42 AM, Sirimanna said: Yes, it's as bad as that video. I think this is a common issue. As long as it doesn’t affect my engine, I’ll just go with it. I even went to a local Mitsubishi dealer, but they couldn’t find the issue either. 😞 Expand Hmm. I too can sometimes hear the faint "pebbles in a tin can" noise in my Lancer but it's never this loud, the phone mic can't even pick it up. 🤔 Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 On 3/14/2025 at 4:46 AM, Sirimanna said: Nop, this happened when moving RPM around 1500-2000 around 50-60 speed Expand 1.5L engine right? Quote Link to comment Share on other sites More sharing options...
0 Sirimanna Posted March 14 Author Share Posted March 14 (edited) On 3/14/2025 at 4:49 AM, Hyaenidae said: 1.5L engine right? Expand No this is 2 L Engine 2011 Mitsubishi lancer es Edited March 14 by Sirimanna Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 On 3/14/2025 at 4:51 AM, Sirimanna said: No this is 2 L Engine 2011 Mitsubishi lancer es Expand Ah. So maybe it's the tensioner like that Reddit user said? did you check it? Quote Link to comment Share on other sites More sharing options...
0 nkt Posted March 14 Share Posted March 14 On 3/14/2025 at 4:44 AM, Hyaenidae said: If it's a loose timing chain the rattle should be heard at engine startup and then disappear afaik https://youtube.com/shorts/qAilLQmLveY Expand no mchan it never happens on startup, idle or while revving in neutral/parking. Only happens while moving around 1500-1800 rpm Quote Link to comment Share on other sites More sharing options...
0 Hyaenidae Posted March 14 Share Posted March 14 (edited) On 3/14/2025 at 5:08 AM, nkt said: no mchan it never happens on startup, idle or while revving in neutral/parking. Only happens while moving around 1500-1800 rpm Expand Do you have a self adjusting drive belt tensioner? Maybe it's the same sound as in that reddit post Edited March 14 by Hyaenidae 1 Quote Link to comment Share on other sites More sharing options...
Question
Sirimanna
Hello everyone, please refer to the sound below. In my 2011 Lancer, when I drive at a constant speed, an abnormal sound comes from the engine area. I recently changed all the pulleys because of this. Any advice on this?
https://youtube.com/shorts/G3uxYjSm6b4?feature=share
https://www.youtube.com/shorts/G3uxYjSm6b4
Link to comment
Share on other sites
16 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.