Honda Vezel, LED low beam light indicator now showing in the dashboard

[kushan]

Guys,

My Vezel's LED low beam light indicator is not showing in the dashboard suddenly. It was parked at outside yesterday and it rained heavily.

Can it be a fuse issue, but all the other indicators are working as expected.

Note that, all the indicators are lighting up when I turn on the engine, but not that one. Not even when I turned on the LED low beam lights.

Edited September 15, 2017 by kushan

[Davy]

The easiest explanation is that the indicator bulb is burnt. Take the gauge cluster out and check the bulb.

[kushan]

12 minutes ago, Davy said:

The easiest explanation is that the indicator bulb is burnt. Take the gauge cluster out and check the bulb.

 

How to do that Davy, Do I need to remove the entire dashboard?

[Davy]

3 hours ago, kushan said:

 

How to do that Davy, Do I need to remove the entire dashboard?

No. You should be able to remove just the gauge cluster. Tilt the steering down, look for screws, remove them and gently pry out the bezels and take the cluster out making sure you don't pull on the connectors. Disconnect them and locate the bulb on the reverse side of the cluster. Swap it with another working indicator bulb to check if it's actually the bulb that's faulty. If it is, replace.