Alto k10 - No start /Only Crank

[saw1993]

Hi, 

My car (Suzuki Alto K10 2011) suddenly stopped when I am driving. Felt like there's a petrol block or something. 

Then I tried to start only starter motor is running. When the key is in the on position , check engine light, immobilizer key light is not lighting. Checked all the relays and fuel pump everything is fine. Scanned through OBD2 aswell. It shows immobilizer error. But everything is fine there.

Electrician says something wrong with the ECU and want to check it with another k10. Unfortunately still couldnt find a another k10.

Do you guys have any idea about this? Any experience? 

 

Edited July 13, 2020 by saw1993

[PerfMad]

Isn't there anyway to bypass the immobilizer ?

[kusumsiri]

4 hours ago, saw1993 said:

Hi, 

My car (Suzuki Alto K10 2011) suddenly stopped when I am driving. Felt like there's a petrol block or something. 

Then I tried to start only starter motor is running. When the key is in the on position , check engine light, immobilizer key light is not lighting. Checked all the relays and fuel pump everything is fine. Scanned through OBD2 aswell. It shows immobilizer error. But everything is fine there.

Electrician says something wrong with the ECU and want to check it with another k10. Unfortunately still couldnt find a another k10.

Do you guys have any idea about this? Any experience?

Did you try with the second key ? (Duplicate key)

[saw1993]

8 minutes ago, kusumsiri said:

Did you try with the second key ? (Duplicate key)

Yup , but failed. 

 

Tks for the reply

Edited July 13, 2020 by saw1993
Tks

[saw1993]

2 hours ago, PerfMad said:

Isn't there anyway to bypass the immobilizer ?

I dont have any idea . Is there anything to do with cracking position sensor to this? 

[kusumsiri]

Just now, saw1993 said:

I dont have any idea . Is there anything to do with cracking position sensor to this? 

I dont think so. You may try to solve said 'immobilizer error' first.

[PerfMad]

13 hours ago, saw1993 said:

I dont have any idea . Is there anything to do with cracking position sensor to this? 

yes if crack position sensor is week or not working this has issues with starting and continuous driving for a long time. Car may die time to time. But mostly if crank position sensor is not working it will light up check engine light. but better get it checked (also try and see whether you can by pass the immobilizer to start the car)

[Donavan]

Hi I have the exact same problem I know it's been a fee years now but what did you do to sort it out