Sumiya Posted March 11, 2013 Author Share Posted March 11, 2013 (edited) Hi Guys Brought these stuff from pioneer motors Ignition coil with resister ignition condensor spark plug wireset spark plugs Contact point carburetor repair kit fuel filterReassembled the Starter Motor Cleaned the stator and armature and will be installing a new set of brush set soon,and found viper motor was in good condition i used it sparingly it used to stuck the moving arms alwaysand reassembled the carburetor with rebuild kit with factory specs jets.Had to put little putty on minor scratches found on the behind and behind doors together and wet sanded them to the smoothest possible,found that the filler primer was not enough thick to keep it strong enough when sanding and found my gun tip was smaller than paint manufactures specs ,no problem there will be another complete filler coat later on,so had to put a little oil primer on those areas to avoid them get rust by next week end i got pics but there is no way that i can upload them today i will see whether i can upload them later, No other way to show them here they are http://imageshack.us/photo/my-images/201/11608463.jpg/http://imageshack.us/photo/my-images/687/34537151.jpg/http://imageshack.us/photo/my-images/203/86937126.jpg/http://imageshack.us/photo/my-images/33/57048537.jpg/http://imageshack.us/photo/my-images/833/11650744.jpg/http://imageshack.us/photo/my-images/823/77828462.jpg/http://imageshack.us/photo/my-images/405/79517959.jpg/http://imageshack.us/photo/my-images/96/50220899.jpg/http://imageshack.us/photo/my-images/9/91925378.jpg/http://imageshack.us/photo/my-images/402/85540395.jpg/http://imageshack.us/photo/my-images/713/94722270.jpg/http://imageshack.us/photo/my-images/827/63334772.jpg/http://imageshack.us/photo/my-images/163/33251585.jpg/ thanksregardssumith Edited March 11, 2013 by Sumiya Quote Link to comment Share on other sites More sharing options...
Sumiya Posted April 1, 2013 Author Share Posted April 1, 2013 Hi Guys Few updates on the last week end stuff http://imageshack.us/photo/my-images/203/13675309.jpg/ http://imageshack.us/photo/my-images/15/29315937.jpg/ http://imageshack.us/photo/my-images/32/47868724.jpg/ http://imageshack.us/photo/my-images/163/37430046.jpg/ http://imageshack.us/photo/my-images/90/70200800.jpg/ http://imageshack.us/photo/my-images/585/37095820.jpg/ http://imageshack.us/photo/my-images/521/91006345.jpg/ http://imageshack.us/photo/my-images/706/94654526.jpg/ http://imageshack.us/photo/my-images/834/26813120.jpg/ thanks regards sumith thanks regards sumith Quote Link to comment Share on other sites More sharing options...
Komisiripala Posted April 1, 2013 Share Posted April 1, 2013 (edited) Machan post the "direct URL" link in the photo box. That way the photo loads on the page as we open it. Great to see some progress tho. Was wondering why this was Silent for some time Edited April 1, 2013 by Komisiripala Quote Link to comment Share on other sites More sharing options...
NZer Posted April 1, 2013 Share Posted April 1, 2013 (edited) On 4/1/2013 at 5:00 AM, Sumiya said: Hi GuysFew updates on the last week end stuff http://imageshack.us/photo/my-images/203/13675309.jpg/ http://imageshack.us/photo/my-images/15/29315937.jpg/ http://imageshack.us/photo/my-images/32/47868724.jpg/ http://imageshack.us/photo/my-images/163/37430046.jpg/ http://imageshack.us/photo/my-images/90/70200800.jpg/ http://imageshack.us/photo/my-images/585/37095820.jpg/ http://imageshack.us/photo/my-images/521/91006345.jpg/ http://imageshack.us/photo/my-images/706/94654526.jpg/ http://imageshack.us/photo/my-images/834/26813120.jpg/ thanks regards sumith thanks regards sumith Machan try to straighten out the body lines a bit more. I can see some really awkward points around the body and around the boot specially where the number plate fits on. Hope all goes to plan and we can see a tidy car soon. Edited April 1, 2013 by NZer Quote Link to comment Share on other sites More sharing options...
Sumiya Posted April 22, 2013 Author Share Posted April 22, 2013 Hi NZer Thanks for the ideas , yes i have noticed them already , i got to to do a lot since it has major fabrication on it , Just going on to those areas slowly with smoothing the pannels, this is just a basic filler code to identify minor imperctions and so ,Most pobebly i might finish alignment pannels and extra filler coat on this week end. Brought Few Littres of Base coat to match with Debear (Toyota 8L5) top coat plus debear clear coat, i cant linked photos direct to the forum as earlier it says " you are not allowed extension on this comunity" i don't know what it is and don't need to bother about even http://imageshack.us/photo/my-images/577/81411523.jpg/ http://imageshack.us/photo/my-images/545/26268167.jpg/ http://imageshack.us/photo/my-images/11/21589619.jpg/ http://imageshack.us/photo/my-images/20/90153493.jpg/ thanks regards sumith Quote Link to comment Share on other sites More sharing options...
Komisiripala Posted April 22, 2013 Share Posted April 22, 2013 Glad to see some progress! Quote Link to comment Share on other sites More sharing options...
Jaliya48 Posted April 22, 2013 Share Posted April 22, 2013 That colour seems promising! I'll be waiting for the results. Quote Link to comment Share on other sites More sharing options...
NZer Posted April 22, 2013 Share Posted April 22, 2013 For some reason i cant see any of the images. Quote Link to comment Share on other sites More sharing options...
Jaliya48 Posted April 23, 2013 Share Posted April 23, 2013 On 4/22/2013 at 5:41 PM, NZer said: For some reason i cant see any of the images. When you click on the link it takes you to an advert but there's a "continue to your image" link on the right side of the screen which will take you to the image. Frustrating, isn't it? Quote Link to comment Share on other sites More sharing options...
Davy Posted April 23, 2013 Share Posted April 23, 2013 On 4/23/2013 at 2:30 AM, Jaliya48 said: When you click on the link it takes you to an advert but there's a "continue to your image" link on the right side of the screen which will take you to the image. Frustrating, isn't it? Just login to imageshack to avoid having to do this. Quote Link to comment Share on other sites More sharing options...
NZer Posted April 23, 2013 Share Posted April 23, 2013 On 4/23/2013 at 2:30 AM, Jaliya48 said: When you click on the link it takes you to an advert but there's a "continue to your image" link on the right side of the screen which will take you to the image. Frustrating, isn't it? Jaliya thanks heaps machan. Was totally trying to work it out with no progress till you showed me how. Thanks heaps Macho Quote Link to comment Share on other sites More sharing options...
NZer Posted April 23, 2013 Share Posted April 23, 2013 On 4/22/2013 at 5:11 AM, Sumiya said: Hi NZerThanks for the ideas , yes i have noticed them already , i got to to do a lot since it has major fabrication on it , Just going on to those areas slowly with smoothing the pannels, this is just a basic filler code to identify minor imperctions and so ,Most pobebly i might finish alignment pannels and extra filler coat on this week end. Brought Few Littres of Base coat to match with Debear (Toyota 8L5) top coat plus debear clear coat, i cant linked photos direct to the forum as earlier it says " you are not allowed extension on this comunity" i don't know what it is and don't need to bother about even http://imageshack.us/photo/my-images/577/81411523.jpg/ http://imageshack.us/photo/my-images/545/26268167.jpg/ http://imageshack.us/photo/my-images/11/21589619.jpg/ http://imageshack.us/photo/my-images/20/90153493.jpg/ thanks regards sumith Machan are you doing the work yourself or getting someone to do it? Quote Link to comment Share on other sites More sharing options...
Sumiya Posted April 24, 2013 Author Share Posted April 24, 2013 Hi Nzer I am doing them my self along with the help of my father as i am free on the week ends,My Father is sound with Mechanicle stuff and we both did fabrication together as none of us was very good on them , all the rest will be doing my self except Upholestory work thanks regards sumith Quote Link to comment Share on other sites More sharing options...
Octanehead Posted April 24, 2013 Share Posted April 24, 2013 Nice thread! But the first few pics I could view but now I cant see them anymore! Good Luck! Here are a few pics for inspiration! Quote Link to comment Share on other sites More sharing options...
Jaliya48 Posted April 24, 2013 Share Posted April 24, 2013 HighTopFade's photos and subjects are breathtaking! Quote Link to comment Share on other sites More sharing options...
NZer Posted April 24, 2013 Share Posted April 24, 2013 Machan take my advice and seek help from a professional. Otherwise the body will look like the sea. From what i see at the moment its needs huge work to come out right. I really like your project hence the advice. Good luck Quote Link to comment Share on other sites More sharing options...
Sumiya Posted April 24, 2013 Author Share Posted April 24, 2013 Hi Nzer Thanks, So far have lot of dudes helping me from datsun community all arround the world since that i came so far good because this is ever my first rebilding project and this is not my job just a hobby , i will not be able to take it perfect to 100% but i will try to be somwhere 90% but from my next rebuild i will try to be 99% on because i have gathered so many expierienc have done lof of mistakes made and corrected ,probebly next will be my b310 or Morris 1100 MKii thanks regards sumith Quote Link to comment Share on other sites More sharing options...
Sumiya Posted April 26, 2013 Author Share Posted April 26, 2013 (edited) Hi OctaneHead thanks dude , the car that you posted is already my desktop background i love it's color and it is little buffed out and modified a little to give it a sporty look here is the factory specs car enjoy it http://imageshack.us/photo/my-images/837/originsl.jpg/ thanks regards sumith Edited April 26, 2013 by Sumiya Quote Link to comment Share on other sites More sharing options...
Jaliya48 Posted April 26, 2013 Share Posted April 26, 2013 (edited) On 4/26/2013 at 3:16 AM, Sumiya said: Hi OctaneHeadthanks dude , the car that you posted is already my desktop background i love it's color and it is little buffed out and modified a little to give it a sporty look here is the factory specs car enjoy it http://imageshack.us/photo/my-images/837/originsl.jpg/ thanks regards sumith Looks lovely. I'd aim of this look personally! Off topic, but I have seen a beautifully restored pastel blue Sunny B310 with its original wheel caps around Bambalapitiya on a daily basis. I think it has a 12SRI number. Edited April 26, 2013 by Jaliya48 Quote Link to comment Share on other sites More sharing options...
Sumiya Posted August 23, 2013 Author Share Posted August 23, 2013 Hi GuysAfter a long time back on the project , Just had a color code on air cleaner and rocker cover an top grille, happy the way it came for the sunshine it is bright an when dark it looks gloomy,Planing for the first base coat on this week end http://imageshack.us/photo/my-images/577/cueq.jpg/ http://imageshack.us/photo/my-images/854/3gpb.jpg/ http://imageshack.us/photo/my-images/836/9hc2.jpg/ thanksregardssumith 2 Quote Link to comment Share on other sites More sharing options...
carboy2011 Posted August 23, 2013 Share Posted August 23, 2013 good job man keep us posted,is blue the color of the car as well? On 8/23/2013 at 5:39 AM, Sumiya said: Hi GuysAfter a long time back on the project , Just had a color code on air cleaner and rocker cover an top grille, happy the way it came for the sunshine it is bright an when dark it looks gloomy,Planing for the first base coat on this week endhttp://imageshack.us/photo/my-images/577/cueq.jpg/ http://imageshack.us/photo/my-images/854/3gpb.jpg/ http://imageshack.us/photo/my-images/836/9hc2.jpg/ thanksregardssumith Quote Link to comment Share on other sites More sharing options...
Komisiripala Posted August 23, 2013 Share Posted August 23, 2013 nice! Quote Link to comment Share on other sites More sharing options...
Jaliya48 Posted August 23, 2013 Share Posted August 23, 2013 Love the colour. Quote Link to comment Share on other sites More sharing options...
maheshw Posted August 23, 2013 Share Posted August 23, 2013 cool.after long time. Quote Link to comment Share on other sites More sharing options...
isam Posted August 31, 2013 Share Posted August 31, 2013 Like the colour. End result should be really nice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.