4DR5 Engine Heat Indicator

Nishan.dj · September 6, 2016

Hi Guys,

Could anyone suggest me how or where to find the coil of the engine heat indicator of a 4DR5 J44. It was burnt out. I attach the image herewith. Thanks.

Twin Turbo · September 6, 2016

Suggest building a time mechiene and going back in time.35 byears.

Or, get a new sensor and meter wired in, (Are you running 24v?)

Nishan.dj · September 6, 2016

On 9/6/2016 at 9:49 AM, Twin Turbo said:

Suggest building a time mechiene and going back in time.35 byears.

Or, get a new sensor and meter wired in, (Are you running 24v?)

Expand

Correction. Its 42 years now. And still looks young.

Yes. its 24v. It is a simple cable that is getting noticeably heated when the ignition key is turned to left side. I prefer to fix it rather than adding a new sensor. Any idea about the coil please?

Attached the 42 years old grandpa below.

Twin Turbo · September 7, 2016

Light bulb moment!

why not replace the wire with a piece of he4ating element from a hot plate,..?

As I figure, you just need a glow wire to show you the glow plugs are hot.

Edited September 7, 2016 by Twin Turbo

Muditha420 · September 7, 2016

On 9/6/2016 at 9:59 AM, Nishan.dj said:

Correction. Its 42 years now. And still looks young.

Yes. its 24v. It is a simple cable that is getting noticeably heated when the ignition key is turned to left side. I prefer to fix it rather than adding a new sensor. Any idea about the coil please?

Attached the 42 years old grandpa below.

Expand

@Nishan.dj did u try to contact the 4DR5 group / owners club in SL, they might have or recommend a fix for the problem.

Nishan.dj · September 15, 2016

Guys,

Anyone knows a place I can buy Nichrome wires? I visited few electronic shops and no hope. I can use it (may be a 18AWG). If you know a place, please post. Thanks.