suzuki maruti alto 2010 Suzuki Maruti Alto 2010 ECU/ECM

[asiridissa]

I have to replace the ECU in my Maruti Alto 2010.
Appreciate if anyone can guide me to buy a new or secondhand one.

[trish_auto]

52 minutes ago, asiridissa said:

Starter motor do work. But the ignition won't do. I checked with a mechanic and he said it's the ECU. 

If I were you, I would try the car with another ECU ( I am not sure whether security system to be unlocked for switching the ignition) and verify where the exact issue is. Take it to a professional who does alto or to agents.

[Davy]

2 hours ago, asiridissa said:

Starter motor do work. But the ignition won't do. I checked with a mechanic and he said it's the ECU. 

That is no reason to replace the ECU. Don't waste your money. Run away from that mechanic as fast as you can.

The first thing you need to do is get a diagnostic scan done to make sure there are no error codes. The ignition signal in OBD2 systems works by sensing the Crank Position Sensor signal. So get your Crank Position Sensor checked out. It maybe as simple as a bad Crank Position Sensor. 

Don't blindly replace the ECU without checking simple things first. 

[Davy]

What's the issue with the ECU? 

[asiridissa]

Starter motor do work. But the ignition won't do. I checked with a mechanic and he said it's the ECU. 

[Hyaenidae]

3 minutes ago, Davy said:

The first thing you need to do is get a diagnostic scan done to make sure there are no error codes.

 

Maybe the mechanic tried to do this and couldn't get the ECU to respond? That would explain him declaring the ECU is FUBAR.

@OP,  is your mechanic reliable? Did he try an OBD reader on your vehicle?

[asiridissa]

Davy, Thanks for the help.
Unfortunately the OBD2 port is also not working. They said that the issue may caused with the malfunction / over voltage with a sensor (may be air flow) because the last couple of days the idling RPM was also higher. 

[asiridissa]

Hyaenidae, Thanks for the help.

Unfortunately the OBD2 port is also not working. I also tryie with OBD

Edited January 9, 2019 by asiridissa

[asiridissa]

 

1 hour ago, trish_auto said:

If I were you, I would try the car with another ECU ( I am not sure whether security system to be unlocked for switching the ignition) and verify where the exact issue is. Take it to a professional who does alto or to agents.

Will try to do that. But still couldn't find an ECU for that. 

Edited January 9, 2019 by asiridissa

[Yuvraj Devemurari]

Bhai aa ECM joye che tamaro mo. Number aapo 

[Hyaenidae]

Just now, Yuvraj Devemurari said:

Bhai aa ECM joye che tamaro mo. Number aapo 

Hi, this is the Sri Lankan equivalent of the Team-BHP forum. You might want to ask your question there if you want to converse in Hindi

[Yuvraj Devemurari]

My 9879619832 my mo number 

 

[Yuvraj Devemurari]

Please call me sir

[Raj Barate]

On 1/8/2019 at 5:24 PM, asiridissa said:

I have to replace the ECU in my Maruti Alto 2010.
Appreciate if anyone can guide me to buy a new or secondhand one.

I want this ecm

 

[dupongthong chirr]

I want this ECM 

[Om Gupta]

On 1/8/2019 at 5:24 PM, asiridissa said:

I have to replace the ECU in my Maruti Alto 2010.
Appreciate if anyone can guide me to buy a new or secondhand one.

 

[Om Gupta]

Bhai yah sim Kaise Milega

[Om Gupta]

Bhai koi number ho send karo