Painting was a most challenging field for me. Because never attempt to do a vehicle paint job earlier other than painting walls in the house . But I have watched (not seen) many times how a painter working from applying filler to last coat. There is a neighbor who do paint jobs and that was a big strength for me as it is possible to clarify somethings from him. So finally decided to learn the art of painting by Moggie. Gathered the basic knowledge from reading some articles and found following video very informative. Also these two technical books.
- How To Paint A Car At Home In 4 Easy Steps (video)
- Causeway Automotive Paints (pdf)
- Debeer Paints (pdf)
Next challenge was a paint gun and a air compressor. Bought a F75 paint spray gun and some flexible hose after expending around Rs 2500. But a air compressor is bit expensive. So again started to find alternatives. Firstly bough a 'paint zoom paint sprayer'. Though it could use with my spray gun with modified hose, the air pressure was not enough to spray well. So found an old deep freezer compressor and a empty AC gas tank. Used them with a foot air pump pressure gauge and some clips to make my air compressor. What could not find was a safety pressure release valve. So had to keep eye on the gauge frequently. When I get familiar with spray gun, watching pressure gauge was not essential as it can feel pressure via spray flame.
Tried to remove existing paint in most body panels as the first job.
Because the floorboard was completely new it made my task easy.